Showing all 5 results


Polyester Resin – 5 Gallon


Our polyester resin is a Iso blend resin, this is a perfect no-run, no-sag resin.

It is mixed with MEKP catalyst to harden.

This resin is a low profile resin that does not need wax for it to dry tack free.

Recommended you add hardener at 1% or 10cc per quart. This gives you approximately 20 minutes of working time.


Vinyl Ester Resin – 5 Gallon


Tough and Corrosion Resistant

This vinyl ester resin is formulated for maximum corrosion resistance to most fuels, vapors, and both acidic and basic chemicals.

It is also heat resistant and blended for toughness.

These qualities make it perfect for repairing tank linings, blistering fiberglass, as well as fabricating tough all-around parts.

Has a shelf life limited to about 3 months.

epoxy Pool Paint Fiberglass, Concrete and Steel Swimming Pool/spa Resurfacing Repair and Restoration

Epoxy Pool Paint – AquaGuard 5000®


Pool Resurfacing Product

Top rated AquaGuard 5000® Epoxy Pool Paint is a high performance, 100% solids, epoxy phenolic resin with proprietary alkali curing agents, reinforced with proprietary additives for physical strength.

AquaGuard 5000® is formulated to be sprayed or roll applied to steel, concrete or fiberglass surfaces. It can be sprayed in a single coat application or roll applied in 2 or 3 (recommended) coats.

This is a two component system: Resin and Activator. One unit will cover 600-700 Sq. Ft.

Epoxy Reducer – Xylene Solvent


AquaGuard Epoxy Reducer can be used in place of Toluene to thin specified oil-based paint, lacquer, varnish, epoxy, adhesives and synthetic enamels when a slower rate of evaporation is desired. AquaGuard Epoxy Reducer will also remove certain adhesives. Its an excellent clean-up solvent for tools and equipment immediately after use. This is not for sale in California.


  • Stronger than paint thinner
  • Formula is similar to toluene but dries more slowly
  • Medium drying