Your new Aquatic surface will require less maintenance and reduce the amount of chemicals necessary to properly balance your pool chemistry. We recommend the following care instructions:
- When filling a pool a sequestering agent should be used to suspend any mineral particles until the filtration system is in service or Carbon Tanks for well water may be required. Check your local pool store for advice.
- Check your pool chemistry and maintain the following levels:
- Chlorine – 1.5 – 2.0 ppm
- Acidity 7.4 -7.6 Ph
- Alkalinity 60-90 ppm
- Calcium 250-350 ppm
- Stabilizer 60-90 ppm
Precaution: Do not allow tri-chlor powder, tablets or stabilizers to settle directly on the surface. This may result in staining or discoloration of the surface.
We recommend that all AquaGuard Surfaces exposed to direct sunlight not in water be cleaned with AquaGuard Fiberglass Pool & Spa cleaner (Sold in our store online) every 30-60 days. Then wax with a car or boat wax. This will maintain your surface from oxidation.
Aquatic Technologies Group is not responsible for the chemical and exterior care or any pool or spa and marine Habitat.
Should you have any questions or desire additional information regarding care instructions for your surface, please contact Aquatic Technology Group, Inc. (772) 225-4389