Regular swimming has many documented benefits. However, inground pools are not practical for many homeowners, and that’s where above-ground pools come in.
With an above-ground pool, you can enjoy all the benefits of having a swimming pool for a fraction of the cost. It’s easy to see why homeowners despair when there is a leak in the system.
In this article, you’ll learn how to find a leak in an above-ground pool and how you can fix it.
How to Confirm a Leak in an Above-Ground Pool
You need to draw the distinction between a real leak and a reduction in the water levels due to evaporation or people splashing a bit too hard in the pool. To rule out these possible causes of water reduction, you have to test for leaks.
Here’s how to find a leak in an above-ground pool:
Do the Water Level Test
This method is as simple as marking the water level in the pool and checking back after 24 hours (without any activity) to see if the water has reduced.
Check for the Source of the Leak
If the test above confirms a leak, the next step is to find the possible source. Start by looking around the pool for puddles or signs of wet grass. You can also run your fingers along the pool’s wall and floor for possible cracks and dents.
If you confirm a leak, you can explore ways to fix it, but if you still can’t find the leak source, it’s time to check the pool equipment. Check the pump, filter, and hose connection for leaks.
Fixing the Leak in Your Above-Ground Pool
The solution to the leaks in your above-ground pool depends on the location of the leak and your pool material. If you’re unsure what to do, it’s best to call in your local pool maintenance experts.
For Tears or Holes
If you find a leak or tear in your pool, you can fix it using swimming pool resurfacing products like vinyl liner, waterproof tape, conventional duct tape, and other pool patch solutions. You don’t need to drain your pool for the job unless the leak area is still underwater.
With the leak patched, give the affected area a day or two to dry out before you fill the pool again.
For Equipment Damage
Leaks caused by equipment damage are harder to handle as a DIY project. You can patch a hose, but any leaks in the filtration system or pumping machine requires professional expertise.
Once the pool expert assesses the situation, they’ll recommend the best course of action. Generally, it will involve replacing the damaged part.
Choose Aquaguard 5000® Products to Fix the Leak in Your Above-Ground Pool
Once you know how to find a leak in an above-ground pool and discover why your pool is leaking, you should address the issue with long-lasting solutions.
AquaGuard 5000® offers a variety of products to address pool damage. Call us today at (772) 232-6274 or visit our Stuart, FL, office for a consultation.